Cover Seals are supplied as pre-formed rings and offer proven high performance, especially in heavy-duty valves or high-pressure feed water pre-heaters. The products remain elastic even with fluctuating temperatures and seating stress up to 200 MPa. Clearances of up to 0.3 mm can be sealed without difficulty and even larger gaps can be controlled by BPG graphite rings reinforced with stainless steel springs integrated into the corners or full metal caps.
The product is designed for use in general valve, control valve, boiler and high pressure valve applications.
BPG Cover Seals are specially manufactured according to specification and application requirements. Media pressure (MPa) and dimension (ID, OD) are the key operating factors which determine the correct design. BPG 6582 features an outside angle. More details on request.
BPG Cover Seals are available with a standard density of 1.6 g/cm³, with 99.85 % C-content in nuclear quality and 98 % industrial quality, in a wide range of variations e.g. rectangular, with inside or outside angle, with integrated extrusion protection in form of metal caps. Additional designs available on request.
|Temperature||–200°C … +550°C (almost all media and air)|
–200°C … +700°C (steam)
–200°C … +2500°C (inert gas)
|ph Value||0 … 14|
|Media*||Hot water and feed water, steam, heat transfer oils, hydrocarbons and many other media.|
|Certificates / Approvals||BAM approval for gaseous oxygen (45MPa up to 60°C; 22MPa up to 200°C)|
High level of chemical resistance and thermal stability
Excellent sealing ability and good elasticity
Not subject to cold flow, shrinkage or ageing
BPG 6582 fulfils the purity requirements for seals in nuclear power station valves (content of soluble chlorides < 20 ppm)
BPG Cover Seals are very adaptable, reliable and maintain their elasticity which offers potential savings in costs and time
Data Sheet BPG 6582